9 prievadų, 8 PoE prievadų komutatorius Hikvision DS-3E1309P-EI(B)
- Patvirtinimai
- Cheminių komponentų sertifikavimasCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
- EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
- SaugumasCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
- Bendra
- Matmenys (P × A × G)170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'')
- Bendras svoris1.114 kg (2.45 lb)
- Installation ModeDesk-Mounted,Wall-Mounted
- Maks. energijos suvartojimas120 W
- Grynasis svoris0.35 kg (0.77 lb)
- Darbo drėgmė5% to 95% (no condensation)
- Darbinė temperatūra0 °C to 40 °C (32 °F to 104 °F)
- Energijos sunaudojimas miego režime10 W
- Maitinimo šaltinis54VDC，2.22A
- Santykinė drėgmė5% to 95% (no condensation)
- RėmasMetal material, fan-free design
- Sandėliavimo temperatūra-40 °C to 85 °C (-40 °F to 185 °F)
- Apsauga nuo viršįtampių6 kV
- Tinklo parametrai
- Vidinė cache atmintis4 Mbits
- MAC adresų lentelė8 K
- Paketų perdavimo spartaWhole-Device Performance: 4.17 MppsPort Performance: 2.68 Mpps
- Prievadai8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port
- Perjungimo našumasWhole-Device Performance: 5.6 GbpsPort Performance: 3.6 Gbps
- PoE
- Maks. PoE prievadų galia30 W
- PoE prievadasPoE: Ports 1 to 8
- PoE maitinimo biudžetas110 W
- PoE galios jungtis8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
- PoE standartasIEEE 802.3af,IEEE 802.3at
- Programinės įrangos funkcijos
- ACL\
- HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported:1. Display the port rate.2. Display the port bandwidth utilization rate.3. Display the PoE power usage.4. Display topology information.5. Display the alarm status.6. Restart ports and devices.7. Enable port long-rage mode.8. Remotely upgrade the device.
- IPSG\
- Ilgo diapazono režimasPorts 1 to 8: up to 300 m.Long range performance may vary depend on camera model or cable condition.
- Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.Support 802.1D STP.Support 802.1w RSTP.
- PoE WatchdogPorts 1 to 8: auto detect and restart the cameras that do not respond.
- Prievadų izoliacijaPorts 1 to 8: port isolation mode to improve network securityPorts in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
- Prievado greičiolimitas\
- Paslaugų kokybė (QoS)\
- System MaintenanceSupport device management via web.Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.Support management via Hik-Central Pro.Support remote management via Hik-Partner Pro.Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.Supports 802.1ab LLDP for peer device discovery.Support port mirroring for fault locating.
- VIP Port\
- VLANVLAN is used for network scale planning and network health improvement.Support 802.1Q.Configurable VLAN ID from 1-4094.Support Trunk, Access port mode.Support Max. 4094 VLAN.