Hikvision 26 prievadų 24 PoE valdomas komutatorius DS-3E1326P-EI(B)
- Patvirtinimai
- Cheminių komponentų sertifikavimasCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
- EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
- SaugumasCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
- Bendra informacija
- Matmenys (P × A × G)440.00 mm × 44.00 mm × 220.80 mm (17.32'' × 1.73'' × 8.69'')
- Bendras svoris3.8 kg (8.38 lb)
- Installation ModeRack (equipped with mounting ears)
- Maks. energijos suvartojimas400 W
- Grynasis svoris2.83 kg (6.24 lb)
- Darbo drėgmė5% to 95% (no condensation)
- Darbinė temperatūra0 °C to 45 °C (0 °F to 113 °F)
- Energijos sunaudojimas miego režime30 W
- Maitinimo šaltinis 100-240 VAC, 50/60 Hz, Max. 6.3 A
- Santykinė drėgmė5% to 95% (no condensation)
- RėmasMetal material
- Sandėliavimo temperatūra-40 °C to 85 °C (-40 °F to 185 °F)
- Apsauga nuo viršįtampių6 kV
- Tinklo parametrai
- Vidinė cache atmintis4 Mbits
- MAC adresų lentelė16 K
- Paketų perdavimo spartaWhole-Device Performance: 11.01 MppsPort Performance: 6.55 Mpps
- Prievadai24 × 10/100 Mbps PoE port,2 × Gigabit combo
- Perjungimo našumasWhole-Device Performance: 14.8 GbpsPort Performance: 8.8 Gbps
- PoE
- Maks. PoE prievadų galia30 W
- PoE prievadasPoE: Ports 1 to 24
- PoE maitinimo biudžetas370 W
- PoE galios jungtis8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
- PoE standartasIEEE 802.3af,IEEE 802.3at
- Programinės įrangos funkcijos
- HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported:1. Display the port rate.2. Display the port bandwidth utilization rate.3. Display the PoE power usage.4. Display topology information.5. Display the alarm status.6. Restart ports and devices.7. Enable port long-rage mode.8. Remotely upgrade the device.
- Ryšio agregavimasLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.Support static link aggregation.Support 1 aggregation group(s).
- Ilgo diapazono režimasPorts 1 to 24: up to 300 m.Long range performance may vary depend on camera model or cable condition.
- Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.Support 802.1D STP.Suppport 802.1w RSTP.
- PoE WatchdogPorts 1 to 24: auto detect and restart the cameras that do not respond.
- Prievadų izoliacijaPorts 1 to 24: port isolation mode to improve network securityPorts in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
- System MaintenanceSupport device management via web.Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.Support management via Hik-Central Pro.Support remote management via Hik-Partner Pro.Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.Supports 802.1ab LLDP for peer device discovery.Support port mirroring for fault locating.
- VIP PortPorts 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
- VLANVLAN is used for network scale planning and network health improvement.Support 802.1Q.Configurable VLAN ID from 1-4094.Support Trunk, Access port mode.Support Max. 4094 VLAN.